Murray 405000x8B Manuel d'utilisateur télécharger pdf (Page 31)

MAINTENANCE

F–030745L

HOW TO INSTALL THE WHEELS

If the wheels must be removed for service, make sure they are

installed as follows.

Front Wheel

1. Make sure the valve stem is to the outside of the tractor. Slide

the front wheel on the spindle (See Figure 33).

2. Fasten the front wheel with washer and cotter pin. Bend the

ends of the cotter pin apart to keep the front wheel on the

spindle.

3. If your model has hub caps, install the hub caps. Make sure

the washer hold the hub caps in place.

Rear Wheel

1. Install the washers and spacer onto the axle as shown in

Figure 34.

2. Mount the square key in the key slot (See Figure 34).

3. Make sure the valve stem is to the outside of the tractor. Align

the slot in the rear wheel with the square key. Slide the rear

wheel on the axle.

4. Fasten the rear wheel with washer and e–ring.

5. If your model has hub caps, install the hub caps. Make sure

the washer hold the hub caps in place.

Figure 33

Front Wheel

Spindle

Valve Stem

Washer

Hub Cap

Cotter Pin

Figure 34

E–Ring

Washer

Hub Cap

Washer

Spacer

Square Key

Valve Stem

Key Slot

Axle

Rear Wheel

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Pas de commentaire

Murray 405000x8B Manuel d'utilisateur Page 31